نوع مقاله : پژوهشی
نویسندگان
1 تبریز، دانشگاه صنعتی سهند، دانشکده مهندسی شیمی، صندوق پستی 1996-51335
2 تبریز، دانشگاه صنعتی سهند، دانشکده مهندسی پلیمر، صندوق پستی 1996-51335
3 تبریز، دانشگاه صنعتی سهند، پژوهشکده مواد پلیمری، صندوق پستی 1996-51335
چکیده
عنوان مقاله [English]
نویسندگان [English]
Due to the characteristics such as flexibility, adhesion, hydrophobicity and low price, bitumen is used in different construction and insulation industries. The major problem with the bitumen material is its restricted physico-mechanical properties, mainly high temperature rutting and low temperature cracking. The aim of this work was to modify bitumen, produced in Tabriz Pasargad Oil Company, and evaluation of its different properties to make it suitable for the weather conditions of North West of Iran. The physico-mechanical, morphological and rheological characteristics of EVA/Cloisite 15A modified bitumen were studied.Two different feeding instructions were used in the mixing of bitumen with modifiers.In the first method, EVA and Cloisite 15A nanoclay were simultaneously added into the molten bitumen and in the second method, EVA and Cloisite 15A were premixed in an internal mixer before adding the polymer/nanoclay nanocomposite into the molten bitumen. The results showed that addition of nanoclay and polymer into the bitumen, led increased softening point and a decrease in the penetration of base bitumen, in which the extent of changes, was higher for the samples prepared by masterbatch method. The rheological properties of the pre-mixed samples exhibited more improvement and these samples showed more elastic behavior. The results of optical microscopy showed that the pre-mixing of polymer and nanoclay led to a more uniform distribution of the swollen polymer phase at the base bitumen. These samples also showed higher morphology stability than those samples prepared in single step. These effects were related to the probable localization of nanoclay at the interface of the two phases.
کلیدواژه‌ها [English]
)