1.Yan S.-P., Fang M.-X., Zhang W.-F., Wang S.-Y., Xu Z.-K., Luo Z.-Y., and Cen K.-F., Experimental Study on the Separation of CO2 from flue Gas Using Hollow Fiber Membrane Contactors without Wetting, Fuel Process. Technol., 88, 501-511, 2007.
2.Rahim N.A., Ghasem N., and Al-Marzouqi M., Absorption of CO2 from Natural Gas Using Different Amino Acid Salt Solutions and Regeneration Using Hollow Fiber Membrane Contactors, J. Nat. Gas Sci. Eng., 26, 108-117, 2015.
3.Naim R., Ismail A.F., Cheer N.B., and Abdullah M.S., Polyvinylidene Fluoride and Polyetherimide Hollow Fiber Membranes for CO2 Stripping in Membrane Contactor, Chem. Eng. Res. Des., 92, 1391-1398, 2014.
4.Luis P., Van Gerven T., and Van der Bruggen B., Recent Developments in Membrane-Based Technologies for CO2 Capture, Prog. Energy Combust. Sci., 38, 419-448, 2012.
5.Ahmadi H., Hashemifard S., and Ismail A., A Research on CO2 Removal via Hollow Fiber Membrane Contactor: The Effect of Heat Treatment, Chem. Eng. Res. Des., 120, 218-230, 2017.
6.Zhang Y. and Wang R., Gas-Liquid Membrane Contactors for Acid Gas Removal: Recent Advances and Future Challenges, Curr. Opin. Chem. Eng., 2, 255-262, 2013.
7.Zhao S., Feron P.H.M., Deng L., Favre E., Chabanon E., Yan S., Hou J., Chen V., and Qi H., Status and Progress of Membrane Contactors in Post-combustion Carbon Capture: A State-Of-The-Art Review of New Developments, J. Membr. Sci., 511, 180-206, 2016.
8.Mosadegh-Sedghi S., Rodrigue D., Brisson J., and Iliuta M.C., Wetting Phenomenon in Membrane Contactors–Causes and Prevention, J. Membr. Sci., 452, 332-353, 2014.
9.Yu X., An L., Yang J., Tu S.T., and Yan J., CO2 Capture Using a Superhydrophobic Ceramic Membrane Contactor, J. Membr. Sci., 496, 1-12, 2015.
10.Mansourizadeh A. and Ismail A.F., Hollow Fiber Gas-Liquid Membrane Contactors for Acid Gas Capture: A Review, J. Hazard. Mater., 171, 38-53, 2009.
11.Rahbari-Sisakht M., Rana D., Matsuura T., Emadzadeh D., Padaki M., and Ismail A.F., Study on CO2 Stripping from Water Through Novel Surface Modified PVDF Hollow Fiber Membrane Contactor, Chem. Eng. J., 246, 306-310, 2014.
12.Hashemifard S.A., Matsuura T., Ismail A.F., Rezaei Dasht Arzhandi M., Rana D., and Bakeri G., Characterization of Partial Pore Wetting in Hollow Fiber Gas Absorption Membrane Contactors: An EDX Analysis Approach, Chem. Eng. J., 281, 970-980, 2015.
13.Rangwala H.A., Absorption of Carbon Dioxide into Aqueous Solutions Using Hollow Fiber Membrane Contactors, J. Membr. Sci., 112, 229-240, 1996.
14.Zhang Y., Wang R., Yi S., Setiawan L., Hu X., and Fane A.G., Novel Chemical Surface Modification to Enhance Hydrophobicity of Polyamide-Imide (PAI) Hollow Fiber Membranes, J. Membr. Sci., 380, 241-250, 2011.
15.Rezaei M., Ismail A.F., Hashemifard S.A., and Matsuura T., Preparation and Characterization of PVDF-Montmorillonite Mixed Matrix Hollow Fiber Membrane for Gas-Liquid Contacting Process, Chem. Eng. Res. Des., 92, 2449-2460, 2014.
16.Maroufkhani M. and Golshan Ebrahimi N., Melt Rheology of Linear and Long-Chain Branched Polypropylene Blends, Iran. Polym. J., 24, 715-724, 2015.
17.Lv Y., Yu X., Jia J., Tu S.T., Yan J., and Dahlquist E., Fabrication and Characterization of Superhydrophobic Polypropylene Hollow Fiber Membranes for Carbon Dioxide Absorption, Appl. Energy, 90, 167-174, 2012.
18.Alonso Y.N., Grafia A.L., Castillo L.A., and Barbosa S.E., Lemon Essential Oil Desorption from Polypropylene/Talc Nanocomposite Films, Iran. Polym. J., 25, 999-1008, 2016.
19.Zhang Y. and Wang R., Fabrication of Novel Polyetherimide-Fluorinated Silica Organic-Inorganic Composite Hollow Fiber Membranes Intended for Membrane Contactor Application, J. Membr. Sci., 443, 170-180, 2013.
20.Ahsani M. and Yegani R., Study on the Fouling Behavior of Silica Nanocomposite Modified Polypropylene Membrane in Purification of Collagen Protein, Chem. Eng. Res. Des., 102, 261-273, 2015.
21.Fosi-Kofal M., Mustafa A., Ismail A.F., Rezaei-DashtArzhandi M., and Matsuura T., PVDF/CaCO3 Composite Hollow Fiber Membrane for CO2 Absorption in Gas–Liquid Membrane Contactor, J. Nat. Gas Sci. Eng., 31, 428-436, 2016.
22.Ghaee A., Ghadimi A., Sadatnia B., Ismail A.F., Mansourpour Z., and Khosravi M., Synthesis and Characterization of Poly(vinylidene fluoride) Membrane Containing Hydrophobic Silica Nanoparticles for CO2 Absorption from CO2/N2 Using Membrane Contactor, Chem. Eng. Res. Des., 120, 47-57, 2017.
23.Ramezani M., Vaezi M.R., and Kazemzadeh A., The Influence of the Hydrophobic Agent, Catalyst, Solvent and Water Content on the Wetting Properties of the Silica Films Prepared by One-Step Sol–Gel Method, Appl. Surf. Sci., 326, 99-106, 2015.
24.Jeevajothi K., Crossiya D., and Subasri R., Non-fluorinated, Room Temperature Curable Hydrophobic Coatings by Sol–Gel Process, Ceram. Int., 38, 2971-2976, 2012.
25.Amiri S. and Rahimi A., Hybrid Nanocomposite Coating by Sol–Gel Method: A Review, Iran. Polym. J., 25, 559-577, 2016.
26.Sohrabi S. and Akhlaghian F., The Effect of Fe-Loading and Calcination Temperature on the Activity of Fe/TiO2 in Phenol Degradation, Iran. J. Chem. Chem. Eng. (IJCCE), 35, 43-50, 2016.
27.Balaji J. and Sethuraman M.G., Corrosion Protection of Copper with Hybrid Sol-Gel Containing 1H-1, 2, 4-Triazole-3-Thiol, Iran. J. Chem. Chem. Eng. (IJCCE), 35, 61-71, 2016.
28.Nørgaard A.W., Mass Spectrometric Study of Nanofilm Products-Chemistry, Exposure and Health Effects, PhD Thesis, University of Copenhagen, December 2010.
29.Yang H., Pi P., Cai Z.Q., Wen X., Wang X., Cheng J., and Yang Z.-r., Facile Preparation of Super-Hydrophobic and Super-oleophilic Silica Film on Stainless Steel Mesh via Sol–Gel Process, Appl. Surf. Sci., 256, 4095-4102, 2010.
30.Behboudi A., Jafarzadeh Y., and Yegani R., Enhancement of Antifouling and Antibacterial Properties of PVC Hollow Fiber Ultrafiltration Membranes Using Pristine and Modified Silver Nanoparticles, J. Environ. Chem. Eng., 6, 1764-1773, 2018.
31.Lv Y., Yu X., Tu S.-T., Yan J., and Dahlquist E., Wetting of Polypropylene Hollow Fiber Membrane Contactors, J. Membr. Sci., 362, 444-452, 2010.
32.Akbari A., Yegani R., Pourabbas B., and Behboudi A., Fabrication and Study of Fouling Characteristics of HDPE/PEG Grafted Silica Nanoparticles Composite Membrane for Filtration of Humic Acid, Chem. Eng. Res. Des., 109, 282-296, 2016.
33.Alavi S.A., Kargari A., Karimi M., Sanaeepur H., and Lariji S., Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk, Iran. J. Polym. Sci. Technol. (Persian), 27, 63-78, 2014.
34.Bian J., Wang Z.J., Lin H.L., Zhou X., Xiao W.Q., and Zhao X.W, Thermal and Mechanical Properties of Polypropylene Nanocomposites Reinforced with Nano-SiO2 Functionalized Graphene Oxide. Compos. Part. A. Appl. Sci. Manuf., 97,120-127, 2017.
35.Esmaeilipur M., Kargari A., and Sanaeepur H., Preparation and Characterization of a Cross-linked Matrimid/Polyvinylidene Fluoride Composite Membrane for H2/N2 Separation, Iran. J. Polym. Sci. Technol. (Persian), 29, 505-517, 2017.
36.Hassanajili S. and Sajedi M.T., Fumed Silica/Polyurethane Nanocomposites: Effect of Silica Concentration and Its Surface Modification on Rheology and Mechanical Properties, Iran. Polym. J., 25, 697-710, 2016.
37.Estella J., Echeverría J.C., Laguna M., and Garrido J.J., Silica Xerogels of Tailored Porosity as Support Matrix for Optical Chemical Sensors. Simultaneous Effect of pH, Ethanol: TEOS and Water: TEOS Molar Ratios, and Synthesis Temperature on Gelation Time, and Textural and Structural Properties, J. Non-Cryst. Solids, 353, 286-294, 2007.